Categories
Toyota

Entry Key Remote Fob Shell Case 2 Button for TOYOTA CELICA CAMRY

New Case/ Shell with a blade
Blade dimensions: 45.8mm x 8.2mm
Compatibility – Rav4, Yaris, Mr2, Mk3, Corolla, Celica, Land Cruiser 100, Camry, Prius, Avalon, Prado, Siena, Solara
Blade can be cut by your local locksmith to match your current one.
No electronics included

Product Features

  • Brand new and high quality
  • 2 Button Remote Key Fob shell/case for TOYOTA
  • Great replacement
Categories
Ford

NEW For FORD FOCUS MONDEO CMAX FIESTA GALAXY NEW 3 BUTTON ENTRY REMOTE KEY Control REPLACEMENT with INTERIOR ELECTRONICS TRANSPONDER CHIPS & LITHIUM COIN CELL

Package: REMOTE KEY FOB CASE W/ UNCUT BLADE X 1

Product Features

  • 100% Brand NEW High Quality. never used on another car and not refurbished, complete with new electronics and immobiliser chip ready to be programmed to your car
  • This fob is compatible with the following vehicles as long as your old fob and key are the same as the pictures in the listing: Focus 2005-2010, Mondeo 2007-2010, Fiesta 2009-2010, S Max 2006-2010, Galaxy 2006-2010, C Max 2003 2010 etc.
  • The Remote keys need to be reprogrammed to your vehicle.How to program a new key fob?Please follow these steps1.Check that the vehicle battery is fully charged and that the anti-theft alarm system is not armed.2. Place the old fob at least 10 meters away from vehicle. Place new fob on dashboard.3.Close all doors. 4 Insert key into ignition.5.Note:After cycling the ignition, the ignition key must be in position II.Turn the ignition key from position 0 to position II eight times within ten seconds.until a sound is heard and leave the ignition on. The doors will lock automatically.Now, use the new fob to unlock the doors.The door locks will cycle to confirm that the remote transmitter has been successfully programmed.6.Note:After a remote transmitter has been successfully programmed, the anti-theft and double locking module will reset the programming mode allowing a further 20 seconds to program the next remote transmitter.Repeat step 4 to program additional remote transmitters.7.Turn the ignition key to position 0.The door locks will cycle to confirm that the anti-theft alarm and double locking module has exited the programming mode.8.Test the system for normal operation.If you do not know how to do it, please kindly contact us for help!